Bird Spikes

Anti-roosting spikes effectively deter gulls and pigeons

P32 spikes on parapet and façade for gull and pigeon control.
Bird Spikes

Protect your property from fouling due to bird excrement. These facal deposits and nesting materials, besides being unsightly, can damage the building’s exterior facade. Use anti-roosting spikes on exposed unprotected areas including parapets and open ledges, roof ridges, signage, external lighting or on any structure in urban or rural areas.

 
  • Bird Spikes are relatively easy to install on exposed flat or curved surfaces
  • Bird Spikes should not be used for smaller birds, however, sometimes P32 Bird Spike with its denser stainless steel spikes is purchased for smaller birds, but it is not warranteed for that use by the manufacturer or ourselves.

  • The installation may fail when used inside voids or building recesses or, ledges where bird shelter is provided by some overhead structure like window heads. Other birdproofing products are available for such areas.

Specifications

  • Available in three models, AP14, AP20 & AP32.
  • The base is UV light-protected polycarbonate, with snap-off sections.
  • The spikes are a heavy-duty 1.4mm in diameter and are made from 302 grade stainless steel, cut flat to prevent injury to both installers and birds.
  • These spikes are moulded into the base for improved durability.
  • Marine grade stainless steel bird spikes are an option.
  • As a guideline, use P32 (32 wires to 33.3cm piece) for gulls and pigeons.
Avipoint™ P14
Where to use: Ideal for use on pipework or narrow ledges as the base is just 20mm wide. On pipework, we recommend glue and cable tying in place. The spike tips are 50mm apart, so will protect an area up to 115 mm wide from one strip.
Bird Activity: For use where there is daytime perching of pigeons.
Pack Size: Supplied in stacks of 15 x 33cm strips = 5m.
Each complete carton contains 10 stacks = 50m.
Specifications: Avipoint P14
  • double rows of spikes
  • product length 33cm
  • product width 50mm
  • protects ledge up to 115mm wide
  • narrow base (20mm)
  • 1.4mm diam. wire
  • 302 grade s/s
  • 150 strips (50m) per carton
Avipoint™ P20
Where to use: With a denser pattern of 'spikes' spanning a greater width, this is the ideal product for protecting most building ledges. The spike tips are 140mm apart, so will protect an area up to 205 mm wide from one strip.
Bird Activity: For use in most situations where pigeons or gulls are perching in the daytime or pigeons are roosting at night.
Pack Size: Supplied in stacks of 15 x 33cm strips = 5m.
Each complete carton contains 10 stacks = 50m.
Specifications: Avipoint P20
  • 10 double rows of spikes
  • product length 33cm
  • product width 140mm
  • protects ledge up to 205mm wide
  • wider base (50mm)
  • 1.4mm diam. wire
  • 302 grade s/s
  • 150 strips (50m) per carton
Avipoint™ P32
Where to use: With a denser pattern of 'spikes' , this is the product of choice in heavily used areas. The spike tips are 200mm apart, so will protect an area up to 265 mm wide from one strip.
Bird Activity: For use on wide ledges, parapets and areas that are heavily used by pigeons or gulls.
Pack Size: Supplied in stacks of 15 x 33cm strips = 5m.
Each complete carton contains 10 stacks = 50m.
Specifications: Avipoint P32
  • 16 double rows of spikes
  • product length 33cm
  • product width 200mm
  • protects ledge up to 265mm wide
  • wider base (50mm)
  • 1.4mm diam. wire
  • 302 grade s/s
  • 150 strips (50m) per carton

Specialist Adhesives

  • Neutral cure RTV adhesives are recommended.
  • One 290gm cartridge can install up to 15M of Avipoint™.
  • The selected adhesive needs to suit the substrate bird spikes will be fixed to.
  • Discuss your adhesive requirements with us

Control

Gulls and Pigeons